CAD

CAD Product Jobs

13 jobs found

3d ago

Principal Product Manager

Tract Capital Mercer Island, WA

Mercer Island, WA

3d ago

$200k - $300k/yr Full time Manager CAD Cad Software

Apply Now

Job Description

Tract Capital is seeking an experienced Principal Product Manager to lead the development of advanced mechanical systems for data center infrastructure. This onsite role on Mercer Island, WA partners with engineering, manufacturing, and operations to shape strategy and ensure cost, quality, scalability, and deployment targets are met. The position offers a salary range of USD 200,000 to 300,000 per year.

Responsibilities

Articulate the vision, requirements, and roadmaps for advanced mechanical infrastructure offerings.
Convert business goals, customer needs, and infrastructure strategy into a prioritized product plan.
Balance performance with cost, manufacturability, reliability, scalability, and deployment requirements.
Guide end-to-end product development from concept validation through New Product Introduction to production.
Manage stage-gate processes, schedules, budgets, risks, and launch activities.
Collaborate with engineering to transition prototypes into scalable manufacturing.
Oversee relationships with OEMs, contract manufacturers, fabricators, and key suppliers.
Monitor supplier performance across quality, cost, delivery, capacity, and production readiness.
Partner with suppliers on manufacturing strategies, value engineering, and design-to-cost initiatives.
Work with Engineering, Construction, Commissioning, Procurement, Operations, Finance, and external partners to ensure successful launches.
Act as the primary product owner, aligning stakeholders on priorities, scope, risks, and execution.
Ensure products integrate seamlessly into design, construction, commissioning, and long-term operations.
Support validation, testing, quality standards, and regulatory compliance.
Lead root cause analysis, corrective actions, and ongoing product improvement.
Collaborate with Supply Chain on sourcing strategies, production planning, inventory, and launch readiness.
Communicate product strategy, priorities, risks, and status to technical teams and executive leadership.
Ensure documentation, installation guides, commissioning procedures, and training materials support deployments.

Requirements

Bachelor's degree in Mechanical Engineering or a related technical field.
10+ years of product management, product development, or technical leadership experience.
5+ years supporting data center infrastructure, mission-critical facilities, or complex mechanical systems.
Proven track record delivering mechanical products from concept through production.
Experience with HVAC, cooling systems, thermal management, fluid distribution, or related technologies.
Familiarity with AutoCAD, Revit, CFD, or similar engineering tools.
Strong understanding of manufacturing, NPI, quality systems, and supplier management.

Technologies

AutoCAD
Revit
CFD

Benefits

100% employer-covered medical, dental, and vision insurance
401(k) program
Paid holidays
Unlimited PTO
Competitive compensation

Key Competencies

Expertise in advanced mechanical systems, cooling technologies, and mission-critical infrastructure
Proven product management and new product development experience
Manufacturing, supplier management, and product industrialization expertise
Cross-functional leadership and executive communication
Strategic thinking with strong analytical and problem-solving abilities
Ability to thrive in fast-paced, complex environments

Additional Information

25-40% travel to manufacturing sites, laboratories, customer locations, and partner facilities
Work across office, laboratory, manufacturing, and construction environments
Competitive compensation and comprehensive benefits package

Expected Salary Range

USD 200,000 to 300,000 base salary plus discretionary bonus.

Tract Capital Employment

Employees at Tract Capital receive competitive compensation and comprehensive benefits, including 100% employer-covered medical, dental, and vision insurance, a 401(k) program, standard paid holidays, and unlimited PTO.

View full job page →

27d ago

Product Design & Development Engineer

Innova Electronics Corp Irvine, CA

Irvine, CA

27d ago

$85k - $90k/yr Full time Electrical Engineering Altium Designer CAD

Apply Now

Job Description

Innova Electronics Corp, anchored at its US headquarters in Irvine, seeks a Product Design & Development Engineer to bridge hardware and firmware R&D with global manufacturing. This onsite role centers on driving products from early prototyping through mass production, coordinating cross-functional teams and international vendors to ensure design intent translates into scalable, reliable hardware.

Responsibilities

Collaborate with Product and Marketing to finalize specifications, review block diagrams, schematics, and enclosure concepts.
Oversee overseas vendors for PCB layout and mechanical tooling fabrication.
Direct prototype evolution, PCBA development, and tooling sample management.
Diagnose functional or electromechanical issues across hardware and firmware.
Serve as the technical gatekeeper for R&D design freezes transitioning to overseas mass production.
Optimize BOM and component selections in collaboration with IC vendors.
Plan and execute hardware and mechanical validation, including environmental, thermal, and electrical limits, plus reliability testing (mechanical stress, drop, vibration, IP rating).
Partner with international certification bodies to prepare products for global market release.
Synchronize timelines across R&D and overseas factories to align schedules and monitor the critical path to mass production.
Coordinate with Marketing, Supply Chain, and Industrial Design to align product launch, component sourcing, and design intent.
Act as the central owner for Engineering Change Orders on hardware and tooling/mold modifications.

Requirements

Technical literacy: solid understanding of schematics and system architectures (MCU/SoC, power, wireless) to bridge conversations between R&D and vendors.
ECAD Tools: proficiency with Altium, Allegro, or OrCAD to review and verify multi-layer PCB layouts.
Lab equipment: experience using oscilloscopes, multimeters, and power supplies to evaluate prototypes.
FFF Validation: ability to check mechanical tolerances, enclosure alignment, button feel, light leakage, and structural integrity.
Firmware/Scripting: basic flashing and scripting to run diagnostic tests on functional prototypes.
Component & Supply Chain: knowledge of component sizing/packaging (SMD, BGA, QFN) and lifecycle assessment (lead times, second sourcing, EOL risks).
Hardware Validation: familiarity with HVT protocols (thermal profiling, stress testing, power consumption analysis).
Mechanical Reliability: awareness of reliability standards (drop, impact, thermal cycling, environmental chamber testing).
Regulatory Compliance: fundamentals of EMI/EMC testing and global standards (CE, FCC, UL).
Engineering Document Control: experience managing BOMs, Gerber files, and releasing Manufacturing Data Packages.
Technical Vendor & Project Management: milestone tracking (Gantt charts) and coordinating root-cause analysis with SMT/tooling factories on assembly, out-of-spec, or cosmetic defects (sink marks, flashing).
Bachelor's degree in electrical engineering with at least 5 years’ experience.
Strong communicator able to align cross-functional, international teams across time zones.
Willing to travel internationally; English/Chinese bilingual is a strong plus.

Technologies

Altium
Allegro
OrCAD

Compensation

USD 85,000 - 90,000 per year

Benefits

401(k)
401(k) matching
Dental insurance
Flexible spending account
Health insurance
Life insurance
Paid time off
Retirement plan

Work Location

In person

Ability to Commute

Irvine, CA 92614 (Preferred)

Ability to Relocate

Irvine, CA 92614: Relocate before starting work (Required)

View full job page →

1mo ago

Senior Product Design Engineer

STARC Systems Inc Brunswick, ME

Brunswick, ME

1mo ago Closed

Full time CAD Design Design Engineering

This position is no longer accepting applications (closed Jul 14, 2026).

Job Description

STARC Systems Inc is seeking a Senior Product Design Engineer to own the full lifecycle of new products, from concept through manufacturing launch. This on-site role in Brunswick, Maine, focuses on leading cross-functional design initiatives and translating market and customer needs into clear requirements that drive prototyping, testing, and production readiness.

Responsibilities

Directs ongoing design initiatives by prioritizing tasks, addressing design and planning challenges, and developing actionable plans to keep programs on schedule.
Oversees end-to-end design and development of new products, accessories, fixtures, and tooling, combining hands-on CAD work with team leadership to meet performance, cost, and timeline targets.
Creates and evaluates design concepts, conducts engineering analyses and testing, and selects materials and manufacturing methods that satisfy product specifications.
Translates customer and market insights into clear product requirements, design inputs, and validated outputs.
Facilitates design reviews, design for manufacturability assessments, and cross-functional gate reviews to ensure alignment with cost, quality, and schedule goals.
Provides post-launch product support, including troubleshooting field issues, evaluating defects, and driving design or process improvements from feedback.
Occasional travel to support product testing, collect customer feedback, and assist with field installations; travel estimated up to 5%.

Requirements

Bachelor's degree in Engineering or Mechanical Engineering.
7 years of product development and design engineering experience, with a proven track record of leading projects to successful product launches.
Proficiency with Office 365 Apps, SolidWorks CAD, project management, and related engineering software.
Knowledge of mechanical engineering disciplines including materials, manufacturing technologies, and processes.

Technologies

SolidWorks CAD
Office 365 Apps
PLM system

View full job page →

1mo ago

Product Design Engineer

MPS Acoustics Plano, TX

Plano, TX

1mo ago Closed

$70k - $80k/yr Full time CAD Design Design Engineering

This position is no longer accepting applications (closed Jul 8, 2026).

Job Description

MPS Acoustics in Plano designs cut and folded felt wall and ceiling installations and adapts core products to fit custom applications. The Product Design Engineer will work hands-on to produce manufacturable, well-documented drawings in collaboration with Sales and Production, applying design-for-manufacturing and design-for-aesthetics principles to ensure repeatable, visually correct results.

Responsibilities

Design products in SolidWorks based on customer drawings, specifications, and aesthetic requirements.
Modify and adapt core MPS products to fit custom customer applications.
Apply design-for-manufacturing and design-for-aesthetics principles so products are buildable, repeatable, and visually correct.
Partner with the Sales team to interpret customer requirements and translate them into clear, easily producible designs.
Design and validate assembly and manufacturing jigs and fixtures as required.
Design, build, and evaluate prototypes for design changes and new product configurations.
Validate fit, manufacturability, and appearance before releasing designs to production.
Support new product development efforts as the product line expands.
Develop and maintain product documentation, including models, drawings, and product standards.
Write clear assembly work instructions, SOPs, and other technical documentation as required.
Establish and apply drafting best practices and revision control so designs stay accurate and consistent.
Identify and execute product and process improvements that reduce cost, defects, rework, and build time.
Drive permanent design fixes and verify that changes deliver the intended result.
Provide day-to-day engineering support to production teams.
Support resolution of quality issues, including root cause analysis and corrective action.
Review drawings produced by drafters and provide technical guidance when needed.

Requirements

2+ years of product design or mechanical engineering experience (made-to-order or high-mix manufacturing preferred).
Assembly jig and fixture design.
Bachelor’s degree in Mechanical Engineering or a related field, or equivalent experience.
Competence in SolidWorks modeling and drafting best practices.
Demonstrated product design experience.
Experience developing product standards documentation.
Strong technical writing ability (SOPs, work instructions, etc.).
Working knowledge of design for manufacturing (DFM).
Experience designing to aesthetic and appearance requirements.

Technologies

SolidWorks
Sheet metal tools
Parametric modeling tools

Benefits

401(k)
Dental insurance
Health insurance
Life insurance
Paid time off
Vision insurance

Outcomes This Role Owns

Manufacturable, aesthetically correct product designs that meet customer requirements.
Core products reliably adapted to custom customer applications.
Clear, usable product documentation and assembly work instructions.
Continual product and process improvements that reduce cost, defects, rework, and build time.
Strong, consistent design standards and drafting practices.

Preferred Qualifications

Experience with parametric modeling tools and SolidWorks sheet metal tools.
Sheet metal design background.
New product development (NPD) experience.
Experience in architectural products, acoustics, or a related manufacturing industry.

Skills and Attributes

Strong critical thinking and problem-solving ability.
Clear communication with both technical and non-technical audiences.
Detail-oriented and accuracy-driven.
Comfortable mentoring drafters and other engineers.
Able to identify the information needed to complete a project and proactively pursue it.
Organized, self-directed, and follow-through driven.

Job Type

Full-time

Location

Plano, TX (On-site)

Compensation

Base salary: USD 70,000 - 80,000 per year

View full job page →

1mo ago

Product Design Engineer

ITT Inc. Valencia, CA

Valencia, CA

1mo ago Closed

$113k - $169k/yr Full time Ansys CAD Catia V5

This position is no longer accepting applications (closed Jul 4, 2026).

Job Description

Product Design Engineer position at ITT Inc. onsite in Valencia, CA, with a salary range of USD 112,700 - 168,500 per year.

Responsibilities

Collaborate with engineering leadership, finance, mechanical engineering, quality, testing, program management, and production support to advance project goals.
Work with cross-functional teams to develop prototypes and products that can transition to production.
Perform design and analysis to meet internal and customer requirements.
Design tooling and fixtures as needed to manufacture designs consistently and cost-effectively.
Assist in resolving technical problems in the lab or on the production floor.
Support evaluation and resolution of escapes and field issues reported by customers.
Generate accurate parts lists and digital bills of materials, including sub-assemblies, fasteners, tooling, and hardware, aligned with design requirements.
Develop procedures for parts and systems, such as Acceptance Test Procedures, Qualification Test Procedures and Reports, and Qualification by Analysis & Similarity Reports.
Create 3D models and 2D drawings of parts and assemblies using ANSI and ASME Y14 geometric dimensioning & tolerancing and other best practices.
Develop product concepts, tooling designs, drawings, and parts lists based on customer data, loads, performance requirements, material applicability, and environmental constraints.
Lead and drive progress of assigned projects to ensure milestones are met.
Develop designs, data, specifications, processes, and reports throughout the product development lifecycle.
Present designs and technical findings at reviews.

Requirements

B.S. in Mechanical or Aeronautical/Aerospace Engineering, or an equivalent combination of education and 8+ years of engineering design and development experience.
Extensive experience designing mechanical components and systems using advanced composites, elastomers, and metals (including ECS components, ducts, and multi-layer panels).
Familiarity with aerospace composite and metal manufacturing methods and best practices.
Self-driven with strong problem-solving capabilities.
Willing and able to share knowledge with other team members in a collaborative manner.
Proficient in CAD modeling and engineering drawings using SolidWorks and/or Catia.
Excellent verbal and written communication skills.
Proficient with Microsoft Office applications.

Technologies

SolidWorks
Catia
Ansys
Oracle
Microsoft Office

Desired Capabilities

Experience with project engineering and technical leadership.
Familiarity with RTCA/DO-160 and MIL-STD-810 environmental testing standards.
Ability to define test plans, write test procedures, and lead development and qualification testing.
Experience with stress analysis and simulations (Ansys preferred).
Familiarity with MRP/ERP systems, preferably Oracle.

View full job page →

1mo ago

Product Design Engineer

Visiontron Corp. Holtsville, NY

Holtsville, NY

1mo ago Closed

$60k - $100k/yr Full time CAD Design Engineering Design For Manufacturing

This position is no longer accepting applications (closed Jul 4, 2026).

Job Description

Visiontron Corp seeks a Product Design Engineer to own end-to-end design, development, and engineering support onsite in Holtsville, NY.

Responsibilities

Independently develop new products, processes, and quality procedures.
Update existing designs to clarify older documentation such as drawings, BOMs, and QC standards.
Design 3D models and production-ready drawings using SolidWorks.
Create Bill of Materials records for new or existing products in Microsoft Excel.
Investigate product performance issues and prototype new designs with documented experiments and tests.
Update documentation for Engineering Change Orders as required.
Populate product specification spreadsheets for customers using Microsoft Excel.
Conduct time study analyses to support accurate costing and process improvements.

Requirements

Experience guiding a product from concept through completion.
Interest or experience with diverse materials and processes including aluminum extrusions, plastic injection molded components, metal fabrication such as welding and machining, stamping, rubber molded components, zinc die cast components, and brass die cast components.
Collaborative approach with production staff to align designs with facility capabilities including CNC milling, CNC plasma, routing tables, welding, sheet metal bending, and other fabrication methods.
Willingness to tackle technical tasks across production and design domains.
3 to 7 years of proven success in design or manufacturing roles.
Familiarity with designing parts for castings, extrusions, stamping, machining, welding, and injection molding is preferred.
Knowledge of drawing standards for manufacturability.
Strong computer skills, especially SolidWorks and the Microsoft Office Suite.
Bachelor's degree in Mechanical Engineering, Industrial Design, or another technical field.
Ability to balance design for manufacturability with cost, durability, and aesthetics.
Excellent organizational, project management, interpersonal, and analytical skills.

Technologies

SolidWorks
Microsoft Excel
Microsoft Office Suite

Benefits

401(k) with matching
Dental insurance
Health insurance
Health savings account
Life insurance
Paid time off
Referral program
Retirement plan
Vision insurance

Pay

$60,000.00 - $100,000.00 per year

Location

Holtsville, NY onsite

View full job page →

1mo ago

Senior Product Design Engineer

ITT Inc. Valencia, CA

Valencia, CA

1mo ago Closed

$140k - $210k/yr Full time Ansys CAD Catia V5

This position is no longer accepting applications (closed Jul 4, 2026).

Job Description

Responsibilities

Provide technical leadership for designated ECS programs, guiding them to meet cost, schedule, performance, and certification targets.
Collaborate with engineering leadership, finance, manufacturing engineering, quality, testing, program management, and production support to achieve program objectives.
Steer the development of product concepts, detailed designs, tooling concepts, drawings, and parts lists based on customer data, load cases, performance requirements, material choices, and environmental constraints.
Drive design and analysis work that satisfies internal standards, customer specifications, and relevant regulatory requirements.
Oversee prototype development and lead efforts to transition designs into repeatable, cost-efficient production.
Design and validate tooling and fixtures needed to reliably manufacture ECS components and assemblies.
Serve as a technical authority for diagnosing and resolving complex issues encountered during development, testing, production, or field operation.
Lead investigations of escapes, non-conformances, and customer-reported field issues, including root-cause analysis and corrective actions.
Ensure accurate generation of parts lists and digital BOMs, including sub-assemblies, fasteners, tooling, and hardware.
Lead the development of technical documentation such as ATPs, QTPs, qualification reports, and qualification by analysis and similarity justifications.
Produce and approve high-quality 3D models and 2D drawings in compliance with ANSI and ASME Y14 GD&T standards and industry best practices.
Present technical status, risk assessments, and recommendations at internal and external design and program reviews.
Mentor and support the technical development of junior and mid-level engineers.

Requirements

B.S. in Mechanical Engineering, Aeronautical/Aerospace Engineering, or an equivalent technical field, with 10+ years of progressively responsible engineering design and development experience.
Extensive experience designing mechanical components and systems using advanced composites, elastomers, and metallic materials (eg ECS components, ducts, multi-layer panels).
Strong working knowledge of aerospace composite and metallic manufacturing processes, design for manufacturability (DFM), and design for assembly (DFA).
Demonstrated ability to independently drive complex technical problems to closure.
Proven track record of knowledge sharing, mentoring, and technical leadership within engineering teams.
Advanced proficiency in CAD modeling and detailed drawing creation using SolidWorks and/or CATIA.
Excellent written and verbal communication skills, with the ability to convey technical concepts to cross-functional and customer audiences.
Proficiency with Microsoft Office applications.

Technologies

SolidWorks
CATIA
ANSYS
Microsoft Office
Oracle

Desired Capabilities

Experience as a project engineer or technical lead on multi-disciplinary development programs.
Familiarity with RTCA/DO-160 and/or MIL-STD-810 environmental qualification standards.
Ability to define test strategies, author test procedures, and lead development, qualification, and certification testing.
Experience performing or directing stress analysis and simulations (ANSYS preferred).
Familiarity with MRP/ERP systems, preferably Oracle.